Radium 6AN ORB Swivel Banjo to .313 SAE Male Fitting
$34.95
$33.20
RAD20-1000-06313
Fabrication
Fittings
New Products
This 90 degree swivel fitting screws into a 6AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all...
Radium Engineering 6AN ORB Swivel Banjo to 8AN Male
$34.95
$33.20
RAD20-1000-0608
Fabrication
Fittings
New Products
Radium Engineering 6AN ORB Swivel Banjo to 8AN Male
Radium 6AN ORB Swivel Banjo to 6AN Male Fitting
$34.95
$33.20
RAD20-1000-0606
Fabrication
Fittings
New Products
This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with...
Radium 4AN ORB Swivel Banjo to 8.5mm Barb
$34.95
$33.20
RAD20-1000-0485
Fabrication
Fittings
New Products
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Radium 4AN ORB Swivel Banjo to 6.5mm Barb
$34.95
$33.20
RAD20-1000-0465
Fabrication
Fittings
New Products
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Radium 4AN ORB Swivel Banjo to 6AN Male
$34.95
$33.20
RAD20-1000-0406
Fabrication
Fittings
New Products
Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.
Radium Engineering Mitsubishi Evo X Fuel Hanger Feed Kit - Microglass Filter
$379.95
$360.95
RAD20-0946-05
Brackets
Fabrication
New Products
High flow feed kit from fuel tank to engine bay using PTFE hoses and Radium in-line fuel filter. Hoses pre-made to length and special...
Radium Engineering DSV 12AN ORB To 12AN Male High Fill
$54.95
$52.20
RAD20-0935
Fabrication
Fittings
New Products
Fuel cell vent valve will roll-over protection. 12AN Male hose connection.
Radium 2-Way Threaded Hose Separator Clamp
$9.95
$9.45
RAD20-0817
Brackets
Fabrication
New Products
Single clamp with two positions. Anodized aluminum.
Radium Engineering Nissan S13 SR20DET 10AN Male Press-Fit Valve Cover Fitting - Exhaust Side
$59.95
$56.95
RAD20-0811
Fabrication
Fittings
New Products
Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.
Radium RB26DETT Valve Cover Intake and Exhaust 12AN Male Press-Fit Fitting
$59.95
$56.95
RAD20-0809
Fabrication
Fittings
New Products
Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.
Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight
$39.95
$37.95
RAD20-0758
Fabrication
Fittings
New Products
Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
Radium Engineering Distribution Block 12-10-10-10 With Fittings
$69.95
$66.45
RAD20-0737
Fabrication
Fittings
New Products
High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative...
Radium Quick Fill Dump Can Standard Filler
$199.95
$189.95
RAD20-0697-00
Fabrication
Filler Necks
New Products
Molded 6 gallon dump can. Compatible with all types of fuel. Includes standard fill spout and accessories. Semi-transparent white color.
Radium Engineering 10AN Male Swivel Banjo 17.5mm Press Fit
$59.95
$56.95
RAD20-0609
Fabrication
Fittings
New Products
Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.45
RAD20-0601
Fabrication
Fittings
New Products
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.45
RAD20-0600
Fabrication
Fittings
New Products
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 10AN ORB to .75in Barb Roll Over Valve
$24.95
$23.70
RAD20-0594
Fabrication
Fittings
New Products
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an...
Radium Engineering Nissan R-35 GT-R Fuel Line Retaining Kit
$139.95
$132.95
RAD20-0560
Brackets
Fabrication
New Products
Set of 5 brackets. Attach to locations on the underside of the Nissan R35 GT-R to hold fuel lines and/or battery cables or other...
Radium Engineering Fuel Cap Remote Mount Vented
$39.95
$37.95
RAD20-0548-V
Fabrication
Fuel Lines
New Products
Replacement fuel cap only. For use with Radium fender mounted fill flange. Includes O-ring.
Radium Engineering Universal Check Valve Kit 6AN
$59.95
$56.95
RAD20-0534-06
Fabrication
Fittings
New Products
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Remote Mount Fill Neck - Straight - 1.5in Barb
$79.95
$75.95
RAD20-0527
Fabrication
Filler Necks
New Products
Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not...
Radium Engineering 08-21 Subaru Fuel Line Retaining Kit
$99.95
$94.95
RAD20-0526
Brackets
Fabrication
New Products
Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.
Radium Engineering 10AN Male Swivel Banjo - 11.8MM Press Fit Fitting
$59.95
$56.95
RAD20-0509
Fabrication
Fittings
New Products
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Radium Engineering Fuel Cell Vent Kit - 12AN
$59.95
$56.95
RAD20-0484-12
Fabrication
Fuel Lines
New Products
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Fuel Cell Vent Kit - 8AN
$59.95
$56.95
RAD20-0484-08
Fabrication
Fuel Lines
New Products
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Hose Separator Clamp - 2 Way
$14.95
$14.20
RAD20-0417
Clamps
Fabrication
New Products
CNC machined aluminum. For 0.39 diameter tube. M6 screw included.
Radium Engineering 10AN Male Swivel Banjo 13.5mm Press Fit Fitting
$59.95
$56.95
RAD20-0409
Fabrication
Fittings
New Products
CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1993-1998 Toyota Supra Base...
Radium Engineering 10AN Male Swivel Banjo 18.0mm Press Fit Fitting
$59.95
$56.95
RAD20-0408
Fabrication
Fittings
New Products
CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1993-1998 Toyota Supra Base...
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
$19.95
$18.95
RAD20-0395
Fabrication
Hoses
New Products
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
$49.95
$47.45
RAD20-0218
Clamps
Fabrication
New Products
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
Radium Engineering Fuel Cell Fill Cap Vented
$34.95
$33.20
RAD20-0148-V
Fabrication
Filler Necks
New Products
Machined aluminum fill cap. Integragted vent with roll-over protection. O-ring included.
Radium Engineering Fuel Filter Body O-Ring - Pair
$4.95
$4.70
RAD18-0022
Fabrication
New Products
O-Rings
Service O-rings for Radium Engineering fuel filters.
Radium Engineering Electrical Bulkhead Stud Kit (Pack of 6)
$59.95
$56.95
RAD17-0048
Fabrication
Fittings
New Products
Radium Engineering Electrical Bulkhead Stud Kit (Pack of 6)
Radium Engineering 6AN ORB to 10mm Barb
$9.95
$9.45
RAD14-0691
Fabrication
Fittings
New Products
Adapter fitting. 6AN ORB male to 10mm male hose barb. Aluminum.
Radium Engineering 6AN ORB To .375IN SAE Male
$19.95
$18.95
RAD14-0649
Fabrication
Fittings
New Products
Radium Engineering 6AN ORB To .375IN SAE Male
